Safety accessories, fittings and other parts for your Cold Jet equipment.
Allows for easier maneuverability of nozzles while blasting.
1” (2.5 cm) OD Aluminum nozzle extension tube
3/4" (1.9 cm) OD threaded extension tube used to extend nozzle from the applicator.
This quick change module allows for quick and safe nozzle changes.
Allows connection of extension tube to applicator.
Allow Low Flow Tight Access nozzles to be used with the Single Hose Applicators.
Aluminum 3/4" (1.9 cm) JICM Nozzle Base
Allows the 1" (2.5 cm) OD nozzle extension tube to be used with nozzle.
Slide easily and rotate around nozzle and ext. tube for optimal control.
4 ft x 8 ft (1.2 m x 2.4 m) screen used to reduce noise exposure up to 12 dBA.
4 ft x 8 ft (1.2 m x 2.4 m) free standing frame used to reduce noise exposure up to 12 dBA.
Cover your blast hose - recommended if blast hose will be exposed to temperatures above 180° F (82.2° C).
Kits meets OSHA requirements for operator noise protection (with the use of properly rated and worn ear plugs).
Recommended use as a safety precaution in case of improper air hose connection or rupture of hose.
Use to connect remote, foot switch, or Dual Trigger Interconnect Box to blast unit. 20' (6.1 m) section.
Control your blast aggression with this internally mounted, low pressure, pressure regulator.
1 1/2" bore (for 1" hose)
1 1/4" bore (for 3/4" hose)
One bond cable shaft collar is required per complete hose run
1 13/16" bore (for 1 1/4" hose)
Designed to remove large amounts of water, oil, rust, and/or other particles from the air supply. Externally mounted.
The Comfort Handle is designed to reduce user fatigue and allow for longer blasting periods.
Mounted to blast system in order to store electrical cord for transporting and storage.
Collapsible bag used to capture unused dry ice from tilt out hopper.
Splits one blast hose into two blast hoses for simultaneous blasting.
50' (15.2 m) of electrical power cord used when additional length of cord is necessary.
Splits one blast hose into two blast hoses for simultaneous blasting. For 1 1/4" (3.2 cm) blast hose.
Splits one blast hose into two blast hoses for simultaneous blasting. For 1 1/2" (3.8 cm) blast hose.
Durable rubber handle with fabric straps to help hang and carry hoses when moving or storing.
poly tubing, 4 mil x 6 in wide x 1100 ft long, clear, polyethylene
Velcro wrap used to assist in control and storage of your hoses.
Designed for safe and convenient transport of 5 Aero nozzles.
The engineered Nozzle Hanger safely stores nozzles when not in use.
Designed for safe and convenient transport of 1 applicator, 3 Aero nozzles, 3 extension tubes, 2 handles and 7 fittings
Used to hang hoses for storage or transportation of blast system. Universal orientation.
Connects the hose to the work piece being blasted bonding the two in order to virtually eliminate electrostatic discharge.
Used to connect the hose to the blast machine and/or to connect extensions to some nozzles
Blast hose fitting used to connect the blast hose to the blast machine and/or to connect extensions to some nozzles
Blast hose fitting used to connect the blast hose to the blast machine.
Aerodynamic hose fitting used to connect the blast hose to the blast machine.
1" (2.5 cm) flange mount (male)
SureFlow Quick Disconnect Fitting (male)
SureFlow Quick Disconnect Fitting (female)
3/4" (1.9 cm) flange mount (male)
Cold Jet CONNECT Customer Service and Support Programs are available for our entire portfolio of dry ice technologies – protecting your investments for the long haul.
